• Eng
  • Rus
  • Ukr

Setting up a proxy through Proxifier. Setting up proxies for different sites in Proxifier

The Proxifier program is designed to help you with connecting proxy servers to software with network access, which is not designed for this by default. With it, you will discover new opportunities for anonymous and safe work on the Internet. The program interface is designed in English. Below we will talk about how the program works.

Instructions for adding proxies to Proxifier

To add a new proxy server for all network connections in the Proxifier program, follow this instruction:

  1. Run the program.
  2. Click on the "Profile" section and go to the "Proxy Servers ...".


  3. Click the Add button.


  4. Enter the IP address of the proxy server in the “Address” field and port in the “Port” field.


  5. Select the protocol of your proxy server.


  6. If authorization by login and password is provided for access to your proxy, then check the “Enable” checkbox and enter your data.


    If authorization is not provided, then skip this step.

  7. Click the “Check” button to check the functionality of the added proxy server.


    If testing showed a red inscription “Testing Failed”, then there are 2 options: the proxy data is incorrect or the server is not working.


    How to use Proxifier if testing shows a negative result? First of all, you need to understand what the problem is: in the wrong entry data or server. Correct the IP address and port or replace the proxy server, and then run the test again.

  8. If the inscription “Proxy is ready to work with Proxifier” appeared, then everything is fine. The proxy server is operational. Click “OK” to save the settings.


Proxy settings in Proxifier

To set up a proxy server in Proxifier for a specific program, follow the instructions below:

  1. Click on the "Profile" section and go to the "Proxy Servers ...".


  2. Click the Add button.


  3. Enter the IP address and port of your proxy server.


  4. Select the protocol of your proxy server.


  5. Check the box next to “Enable” and enter the data to access your proxy server. If authorization is not provided in it, then skip this step.


  6. Click “Check” to test the proxy.


  7. If a red text appears, it means that the Proxifier is not working properly through a proxy. Try to verify that the proxy server data is entered correctly. Replace the proxy if necessary.

    If the green text “Proxy is ready to work with Proxifier” appears, then the proxy server is working, so you can click on “OK”.


  8. Click OK again.


  9. Close another window by clicking on “OK”.
  10. Go back to the "Profile" section and click on the "Proxification Rules ..." tab.


  11. You will see a window in which you need to click "Add".


  12. Write the name of the program.
  13. Specify the launch file of the desired browser or other application by clicking the "Browse" button. In this case, we are considering proxy settings in Google Chrome.


  14. In the "Action" field, select the proxy server you added earlier and click "OK."


  15. Close the rest of the windows and try to go through the added program to any site to check the IP address. If it does not show your valid IP address and port, but the added proxy, then the configuration was successful.

    If not, then you need to check the correctness of data entry or replace the proxy server due to its inoperability.

Proxy settings for different sites in Proxifier

To set up a proxy for different web resources, follow the 3 main steps.

1 step: Adding a proxy server to Proxifier

Follow the instructions:

  1. Click on the "Proxy Servers ..." button.


  2. Click Add


  3. Enter the IP address and port of your proxy server.
  4. Select proxy protocol


  5. Check the “Enable” box and specify the login, password from the proxy (if your server supports authorization in this way).


  6. Click OK, then No.


Thus, you can add an unlimited number of servers to configure proxies for different sites.

Step 2: Configure the proxy server in Proxifier

Our proxy has been added to the Proxifier, it remains to configure additional parameters. Proxy settings for different sites are done as follows:

  1. Click on the “Proxification Rules ...” icon.


  2. Click "Add."


  3. Write the name of the new rule.
  4. Enter the site for which you want to configure the proxy server in the “Target hosts” box. If there are several, then enter them separated by a semicolon (";").


  5. Near the “Action” parameter, select the required proxy server from the drop-down list.


  6. Click OK.


You learned how to configure Proxifier. It remains only to test its performance.

Step 3: Verify the proxy server through Proxy Fire

The basic setup is complete. It remains only to check the functionality of added proxies through Proxifayer. To do this, follow the instructions:

  1. Click on the “Proxy Servers ...” icon.


  2. Select your proxy server and click "Edit."


  3. Click the “Check” button to verify that the Proxifier setup was successful.


  4. If you saw the green inscription “Proxy is ready to work with Proxifier”, then everything works. If the red inscription “Testing Failed” is highlighted, then you need to double-check the correctness of the entered data and, if necessary, replace the proxy with another one.

So, we figured out how to connect a proxy in Proxifier for all network connections, as well as how to configure a server for individual programs or sites. As you can see, this is a simple process that can be completed in a few minutes. If you still have questions, ask them in the comments.

For maximum security for using the Internet, we recommend using an anti-detection browser with a fingerprint replacement system. Read the proxy configuration guide for Linken Sphere.